Camber Corporation U2 ISR MPC Scientific Engineering/Technical Assistance (SETA) Analyst 16964 in Beale AFB, California

Description

Huntington Ingalls Industries - Technical Solutions Division, Integrated Mission Solutions Group (Camber Corporation) provides mission-critical engineering and technical service to Information Technology, Federal Civilian, and National Security, Aerospace & Defense and International government and commercial customers at over 100 locations worldwide.

HII-TSD, Integrated Mission Solutions Group (Camber Corporation) is currently seeking a Scientific Engineering/Technical Assistance (SETA) Analyst to support the U-2 Intelligence, Surveillance, Reconnaissance (ISR) Mission Planning Cell (MPC) program to work out of Beale Air Force Base, California with possible travel to other continental United States (CONUS) or overseas (OCONUS) locations as directed by the 99thReconnaissance Squadron Commander (99 RS/CC).

The U2 ISR MPC SETA Analyst shall provide support to the future development of requirements for the Mission Planning Cell located at Beale AFB, CA. This position resides within the U-2 Research & Development Laboratory and is responsible for assisting the Technical Director, Program Manager, Chief Technology Officer, Chief Innovation Officer, and the 99 RS/CC . To facilitate future MPC development the contractor will need to work closely with key personnel within the following agencies: Missile Defense Agency (MDA), Headquarters Air Force (HAF)/ Intelligence office (A2), and Air Force Material Command (AFMC) Air Force Life Cycle Management Center (AFLCMC), Air Force Research Laboratory (AFRL), the Common Mission Control Center (CMCC) program, and others as required. Contractor will be required to provide analytical, advisory, technical expertise and analysis on anticipated/proposed activities to enable Multi-Domain Command and Control (MDC2) and Data to Decision (D2D) efforts as they support the Air Forces Air Superiority 2030 Flight Plan. The scope of this effort provides Scientific Engineering and Technical Assistance (SETA) to coordinate with agencies at MDA, HAF/A2, and others in support of the Headquarters Air Force Intelligence Surveillance and Reconnaissance (ISR) Capabilities office (HAF/A2CC). The contractor shall support Combat Air Forces (CAF) integration of programmed and developing ISR capabilities into the broader Joint and National Intelligence Community (IC). The Contractor has the commensurate experience and judgment to: lead extremely technical working groups, author and prepare detailed engagement plans, address future technologies targeting future Air Force program roadmaps, establish/complete demonstration studies, measure technical performance of sensors in ISR experimentation, review interagency finding reports and coordinate amongst stakeholder agencies. Contractor will also build: future Concepts of Operations (CONOP), Concepts of Employment (CONEMP), Tactics Techniques and Procedures (TTPs), and Demonstration Studies. The contractor will assess future mission requirements and threat analysis while monitoring maturing technology efforts and Diminishing Manufacture and Supply/Material Shortages existent with Air Force Capabilities today to advise the AF on future direction.

Duties and Responsibilities (to include but not be limited to the following):

  • The SETA Analyst shall provide program, technical, and administrative support to determine how to transition existing U-2 Command & Control (C2) capabilities (in all AORs) to OMS and evaluate how this transition would affect current reliability and maintainability, in particular with regard to MDC2 interfaces.

  • Provide program, technical, and administrative support to determine how additional C2/ISR sensors and products can be shared and fused with other intelligence products and programs which would provide an immediate force multiplier to the U-2 AORs.

  • Provide program, technical, and administrative support for project oversight.

  • Conduct scheduling, budgeting, and reporting to ensure execution is within cost and schedule.

  • Conduct research, analysis, and technical evaluations of OMS compliance of existing and developmental sensors that support U-2 AORs.

  • Evaluate software components, specifications, and technical documentation to evolve a net-centric AF ISR enterprise.Agencies formally releasing this information include, but are not limited to: (1) the Office of the Under Secretary of Defense (Intelligence; OUSDI), (2) MDA and sub-components, (3) the Unmanned Aerospace Systems (UAS) C2 Standard Initiative (UCI) and sub-components, and (3) AFLCMC contractors.

  • Research and analyze OMS specifications for feasibility, reliability, compatibility, interoperability, and sustainability for implementation into the AF ISR Enterprise.

  • Provide recommendations to the Government to provide engineering, technology enhancements, and reliability enhancements for the U-2 weapon system, incorporating software and hardware components.The SETA Analyst shall establish integrated program schedules, engineering reviews, and Technical Exchange Meetings (TEM) as required.

  • Review and participate in multiple ongoing COCOM AOR Maintainability/Reliability studies to understand CMCC and AF DCGS interoperability requirements with U-2 MPC.

  • Research and analyze systems, methods, procedures, and regulations related the process to gain Interim Authorization to Test (IATT) and Authority to Operate (ATO) approval for software, hardware, and systems.The intent of this research is to create written guidance and continuity for ongoing and future MPC lines of effort as related to compliance with Information Assurance (IA) regulations and requirements.

  • Research and analyze contracting vehicles relevant to ongoing and future MPC lines of effort.The intent of this research is to create a repository of available contracting vehicles and methods by which they can be employed in support of MPC objectives.

  • Maintain strict adherence to all published instruction, guidance, and regulations.

  • Security Management: Comply with and enforce National, Department of Defense (DoD), and Air Force security policies and directives, including: (1) both verbal and written reporting procedures; (2) deterrence, detection, isolation, containment, and recovery from information system and network security intrusions.

  • Passport and VISA Requirements: All Contractor personnel shall be deployment eligible and may be required to travel outside the continental United States. Deployment eligible personnel shall be required to obtain and maintain a valid US Passport. VISA requirements shall be determined by State Department for each location. Contractor Personnel in a TDY status require a minimum a 120-day VISA unless limited by country of entry.< >of Forces Agreement: The contractor is responsible for obtaining all necessary legal advice concerning the content, meaning, application, etc., of any applicable SOFAs and/or similar agreements. The SETA Analyst shall adhere to all relevant provisions of the applicable SOFA's and other similar related agreements. The contractor is responsible for providing the government with required documentation to acquire invited contractor or technical expert status, if required by SOFA.

Qualifications and Experience:

General Required Qualifications-

  • U.S. citizenship required

  • Maintain a current passport

  • Obtain all entry/exit visas for countries as required for work performance.

  • Pass a standard physical examination that includes, at a minimum: medical history, height, weight, blood pressure, HIV antibody, and chest x-ray.

  • Be physically capable of performing tasks outlined in Duties and Responsibilities Section above.

  • Have all required immunizations prior to OCONUS travel.

  • Comply with all security requirements as outlined the contract Statement of Work (SOW).

  • Be able and willing to work in a demanding, high-stress environment.

Specific Required Qualifications-

  • Bachelor’s Degree

  • Experience with existing U-2 Command & Control (C2) capabilities (in all AORs)

  • Experience with Multi-Domain Command and Control, Cross-Domain, and Open Mission Systems.

  • Familiarity with Common Mission Control Center (CMCC).

  • Experience with C2/ISR sensors and products

  • Experience with fused intelligence products and programs

  • Experience with for project management

  • Experience with scheduling, budgeting, and reporting

  • Experience with OMS compliance of existing and developmental sensors

  • Experience with net-centric AF ISR enterprise.

Desired Qualifications-

  • MBA or Advanced Technical Degree.

  • Familiarity with Common Mission Control Center (CMCC).

  • Ability to interface with: (1) the Office of the Under Secretary of Defense (Intelligence; OUSDI), (2) MDA and sub-components, (3) the Unmanned Aerospace Systems (UAS) C2 Standard Initiative (UCI) and sub-components, and (3) AFLCMC contractors.

  • Experience with developing engineering, technology enhancements, and reliability recommendations.

  • Experience with establishing integrated program schedules, engineering reviews, and Technical Exchange Meetings (TEM).

  • Experience with COCOM AOR Maintainability/Reliability studies.

  • Experience with Information Assurance (IA) regulations and requirements as it relates to Interim Authorization to Test (IATT) and Authority to Operate (ATO) approval.

  • Experience with the development and employment of agile contracting vehicles.

Security:

  • US Citizenship required

  • The selected applicant will be subject to a security investigation and must meet eligibility requirements for access to classified information

  • All candidates will be subject to a pre-employment background investigation and drug screening per HII requirements

  • Must have and maintain a Top Secret and NATO Secret clearance and be eligible for SCI access

  • Must maintain eligibility for SAP/ACCM access.

About Us

Camber Corporation is part of the Integrated Mission Solutions Group of HII’s Technical Solutions division. Integrated Mission Solutions Group is a leading provider of Agile Software Engineering and Information Technology solutions; All Hazards services; Modeling, Simulation, and Training solutions and services; Unmanned Systems support; Intelligence Analysis and Operations; and Engineering and Management services to Department of Defense, Federal, and commercial customers.

Integrated Mission Solutions Group (Camber), a subsidiary of Huntington Ingalls Industries, Inc. (HII) is headquartered in Huntsville, AL. From Camber’s founding in 1990, we have grown to 32 offices, positioned to provide responsive support to our customers across the United States. We deploy personnel to support our customers globally, including many locations in Asia, Africa, and Europe, providing daily interface on technical, programmatic, and operations issues. Overall, more than 1,600 Camber professionals deliver ISO 9001:2008-certified and CMMI ML3 high-value solutions to customers worldwide.

Camber Corporation is an Equal Opportunity Employer EOE/AA Minorities/Females/Veterans/Disabled