[{"country_short": "USA", "city": "Fort Bliss", "description": "Customer Service Support Technician 8066\nWork Location: Fort Bliss, TX\nJob Code: 8066\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\n\u2022 An Associate\u2019s degree in a related technical field or equivalent experience in the simulation, computer maintenance, electronics technology, personal computer repair or assembly or other closely related technical discipline.\n\u2022 One year experience in the simulation, computer maintenance, electronics technology, personal computer repair or assembly or other closely related technical discipline.\n\u2022 Familiarity with the interrelationships of subsystems (i.e. electronic, mechanical, hydraulic, simulated vehicle operation); and the ability to plan work sequences and to select proper tools and testing instruments.\n\u2022 Ability to read and analyze electronic schematics, wire diagrams and other mechanical and technical drawings.\n\u2022 Ability to use a variety of hand tools and small electronic test devices.\n\u2022 Possess strong written and oral communication skills. \n\u2022 Must possess ability to crawl into tight or low spaces, and lift a minimum of fifty pounds unassisted.\n\u2022 Have the ability to be \u201con-call\u201d to deploy for field maintenance service calls at site.\n\u2022 Must possess and maintain a valid driver\u2019s license, U.S. Passport when required by management, and automobile insurability.\n\u2022 Obtain IPC-A-610D and IPC/WHMA-A-620A Certification within 30 days of hire date.\n\u2022 Obtain A+ Certification within six months from date of hire.\n\u2022 Obtain Security+ Certification within twelve months from date of hire.\n\nDuties:\nThe Customer Service Support Technician provides basic level technical, operational and instructional assistance to customers and trainers via phone, email and fax, and onsite using simulation training systems in the military and commercial markets. Technical assistance includes computer, electronic and mechanical troubleshooting, field repairs, using wiring diagrams, schematics, drawings, product data, and other resources. This position takes technical and procedural direction if needed from our Raydon Headquarters through our Fleet Services Dept. At location the Raydon Training Specialist will be the location lead and direct the efforts as required to meet the customer requirements.\nTypical duties include, but are not limited to:\n\u2022 Assisting in or leading the instruction of customer personnel in the operation and maintenance of training products and/or modified training systems.\n\u2022 Applying comprehensive technical knowledge to solve complex problems by interpreting manufacturers' manuals or similar documents.\n\u2022 Examining training systems and subsystems to diagnose sources of trouble and providing preventive maintenance tips directly to customers.\n\u2022 Removing, dismantling or partly dismantling training systems and/or components and performing repairs that mainly involve the use of hand tools and/or test equipment in replacing broken or defective parts with items obtained from stock/vendors.\n\u2022 Preparing written synopses of repair activities.\n\u2022 Conducting on-site installation of equipment and following established testing procedures to ensure proper working order.\n\u2022 Isolating equipment start-up malfunctions and taking corrective action, receiving technical guidance, as required, from supervisor or engineers.\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-23 18:33:29", "url": "http://camber.jobs/xml/28891514/job", "country": "United States", "company": "Camber Corporation", "title": "Customer Service Support Technician 8066", "reqid": "8066", "state": "Texas", "state_short": "TX", "location": "Fort Bliss, TX", "uid": 28891514}, {"country_short": "USA", "city": "Killeen", "description": "VP & Deputy Div Mgt 8061\nWork Location: Killeen, TX\nJob Code: 8061\n# of openings: 1\nSalary Range (Annual): TBD\n\n\nDescription\n\nThis individual must have experience and ability to work with senior leader of foreign government in order to develop and manage major program within the Southwest Asian region. A masters degree in management or foreign relations is preferred. At least 20 years of experience working in military matters and teaching others in the art of national defense. Physically fit and willing to travel.\nPerform the duties of the deputy division manager for overseas operations with the Operation, Training and Testing Division (OTTD) of Camber Corporation. Report directly to the division manager on all matters concerning your assigned tasks. Work with both US and foreign leaders in the execution of you assigned duties. Responsible for business development and management of programs supporting overseas tasks, with initial focus on SWA and Saudi Arabia. Other duties as assigned.\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-21 15:33:40", "url": "http://camber.jobs/xml/28831804/job", "country": "United States", "company": "Camber Corporation", "title": "VP  and  Deputy Div Mgt 8061", "reqid": "8061", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28831804}, {"country_short": "USA", "city": "Killeen", "description": "Military Vehicle Operator/ Driver 8030\nWork Location: Killeen, TX\nJob Code: 8030\n# of openings: 7\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nMust be licensed to operate a truck. Must have a \"satisfactory\" driving record. Proof of military vehicle driving experience, e.g. DA 2-1, DA 348, etc. for any/all of these specific Tactical Wheeled Vehicles (TWV)/trailers: Heavy Equipment Transporter (HET), Heavy Expanded Mobility Tactical Truck (HEMTT), RG33 MRAP, AMK23, M1078, M1084, M1097 and M915 with M872 Trailer. Ability to learn and utilize drive-by-wire and Remote Control for the vehicle. \nJob Duties:\nWill be responsible for driving, vehicle maintenance and presentation of Tactical Wheeled Vehicles (TWV)/trailers: Heavy Equipment Transporter (HET), Heavy Expanded Mobility Tactical Truck (HEMTT), RG33, AMK23, M1078, M1084, M1097 and M915 with M872 Trailer during vehicle testing.\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-10 20:54:10", "url": "http://camber.jobs/xml/28614056/job", "country": "United States", "company": "Camber Corporation", "title": "Military Vehicle Operator/ Driver 8030", "reqid": "8030", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28614056}, {"country_short": "USA", "city": "Killeen", "description": "Military Vehicle Operator/ Driver (Team Lead)\nWork Location: Killeen, TX\nJob Code: 8031\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nMust be licensed to operate a truck. Must have a \"satisfactory\" driving record. Proof of military vehicle driving experience, e.g. DA 2-1, DA 348, etc. for any/all of these specific Tactical Wheeled Vehicles (TWV)/trailers: Heavy Equipment Transporter (HET), Heavy Expanded Mobility Tactical Truck (HEMTT), RG33 MRAP, AMK23, M1078, M1084, M1097 and M915 with M872 Trailer. Ability to learn and utilize drive-by-wire and Remote Control for the vehicle. \nJob Duties:\nWill be responsible for driving, vehicle maintenance and presentation of Tactical Wheeled Vehicles (TWV)/trailers: Heavy Equipment Transporter (HET), Heavy Expanded Mobility Tactical Truck (HEMTT), RG33, AMK23, M1078, M1084, M1097 and M915 with M872 Trailer during vehicle testing.\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-10 20:54:10", "url": "http://camber.jobs/xml/28614053/job", "country": "United States", "company": "Camber Corporation", "title": "Military Vehicle Operator/ Driver (Team Lead)", "reqid": "8031", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28614053}, {"country_short": "USA", "city": "Killeen", "description": "Administrative Assistant\nWork Location: Killeen, TX\nJob Code: 8028\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nAssist in management of a contracted project for the US Government. Requires a high school diploma with at least 5 years of experience in the field or in a related area, or BS degree with a minimum of 3 years experience in office administration. A wide degree of creativity and latitude is expected. Provides a varity of tasks, and reports to program manager. Prefer someone currently holding a Secret level clearance, but may consider applicants otherwise qualified, and ability to qualify for Secret clearance. \nJob Duties:\nPerforms a variety of administrative functions. Schedules appointments, gives information to callers. Composes memos, transcribes notes, and researches and creates presentations. Generates reports, handles multiple projects, and prepares and monitors invoices and expense reports. May assist with compiling and developing the annual budget. Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. May direct and lead the work of others. A wide degree of creativity and latitude is expected. Reports to a program manager. \n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-10 20:53:56", "url": "http://camber.jobs/xml/28613980/job", "country": "United States", "company": "Camber Corporation", "title": "Administrative Assistant", "reqid": "8028", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28613980}, {"country_short": "USA", "city": "Killeen", "description": "Safety Analyst 8029\nWork Location: Killeen, TX\nJob Code: 8029\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nAssist in management of a project safety program. Must be aware of federal, state, and local safety laws to ensure compliance with all regulations. BS degree with a minimum of 4 years\u2019 experience in safety related analyses, Certified Safety Health Official (CSHO), or comparable safety certification, fully familiar with requirements in OSHA Standards and Training Guidelines, General Industry Training Requirements 29 CFR Part 1910. Bachelor's degree preferred, but directly related job experience may be substituted. A wide degree of creativity and latitude is expected. Provides a varity of tasks, reports to program manager. \nJob Duties:\nAssist the Chief Safety Engineer in providing all safety documentation required for project, conduct of a system safety management and engineering program using MIL-STD 882 as guidance. Assist in preparation of Safety Assessment Reports (SAR) DI-SAFT-80102B and System Safety Program Plan (SSPP) DI-SAFT-816260579. Identify the safety-related functions (safety critical and safety significant) of the system and help establish a protocol of analysis, design, test, and verification and validation of those functions, and include them in the Safety Analysis. Help in tailoring and communicating initial safety-related requirements or constraints to the system and software designers as early in the life-cycle phase as possible. Identify, document, and track system and subsystem-level hazards for inclusion in the Hazard Analysis. Identify the system-level effects of each identified hazard for inclusion in the Hazard Analysis. Categorize each identified hazard in terms of severity and probability of occurrence (specify qualification or quantification of likelihood) for inclusion in the Hazard Analysis. Assist in conduct of an in-depth analysis to identify each failure pathway and associated causal factors (internal and external). This analysis shall be to the functional depth necessary to identify logical, practical and cost-effective mitigation techniques and requirements for each failure pathway initiator (causal factor). This analysis should consider (but is not limited to) all hardware, software, and human factor interfaces as potential contributors for inclusion in the Hazard Analysis. Help in deriving safety-specific hazard mitigation requirements to eliminate or reduce the likelihood of each causal factor for use in the Hazard Analysis. Submit for approval to the certifying authority all waivers and deviations where the system does not meet the safety requirements or certification criteria. Submit for approval to the acquiring authority an integrated system safety schedule that supports the programs engineering and programmatic milestones. Assist the Safety Engineer to insure the results of all safety engineering analysis that are performed are formally documented in a closed-loop hazard tracking database system. Assist project team in providing the following documentation : Functional Hazard Analysis (FHA), Preliminary Hazard Analysis (PHA), Safety Requirements/Criteria Analysis (SRCA), Subsystem Hazard Analysis (SSHA), System Hazard Analysis (SHA), Operating and Support Hazard Analysis (O&SHA), Failure Mode and Effects Analysis (FMEA) as required. \n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-10 20:53:56", "url": "http://camber.jobs/xml/28613981/job", "country": "United States", "company": "Camber Corporation", "title": "Safety Analyst 8029", "reqid": "8029", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28613981}, {"country_short": "USA", "city": "Killeen", "description": "Software Engineer\nWork Location: Killeen, TX\nJob Code: 8016\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nMinimum of BS degree in Software Engineering or related field, Master's degree preferred. Must be fully knowledgable and have 4-5 years experience in development, conduct, management, and monitoring of software related activities through a Software Development Plan. A wide degree of creativity and latitude is expected. Reports to program manager.\n*This position is contingent upon award.\nJob Duties:\nThe Software Engineer shall prepare and maintain a Software Development Plan (SDP) for delivery to the Government. The SDP shall describe how Camber will develop, conduct, manage, and monitor all software related activities. The SDP shall address the handling of any safety critical software to include the documentation, the flow chart of all identified hazards mitigated by software to software safety requirements, safety requirements to the source code, and unit testing up through system level testing. The SDP shall include the Contractor software safety program. The safety program described in the SDP shall address the software hazards analysis and tracking system to be used on the program. Software development, modification to, or add-on/upgrades for the AMAS program shall be developed and documented in accordance with IEEE STD 1228-1994, IEEE Standard for Software Safety Plans and support the DTC Policy Bulletin No. 11-10, Software System Safety Verification Policy, Dated 27 Sep 10. Provide technical support to project team members. Some travel (4-5 days duration) required. \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-08 18:12:19", "url": "http://camber.jobs/xml/28539927/job", "country": "United States", "company": "Camber Corporation", "title": "Software Engineer", "reqid": "8016", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28539927}, {"country_short": "USA", "city": "Fort Bliss", "description": "Journeyman Information Systems Analyst\nWork Location: Fort Bliss, TX\nJob Code: 8017\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nOne year of experience supporting any combination of: system acquisition support, systems analysis and design, network services, database planning and design, data/records management, programming, studies and analysis. CompTIA Security+ and A+ certification or CompTIA Security+ and Network+ certifications are REQUIRED. Experience with MS Vista, script writing, VPN troubleshooting and maintenance are all a plus.\nDuties:\nProvide routine analysis support to systems development. Participate in disciplined processes that assure compliance with rigorous company and client standards, policies and procedures for quality task performance. Qualified to serve as Configuration Manager. Duties include, but are not limited to the following: Request services via email, telephone, or as walk-ins. Receive request and enter into the Help Desk Log. PC/laptop and Software Installation/Set-Up/Troubleshooting. Install and set-up PCs, peripherals, and accessories. Load/reload applications and troubleshoot PCs and software problems.  Create and assign new print queues. Develop, schedule, plan, coordinate and manage the execution of all phases of IT support to conferences/workgroups/briefings/DVTCs. Keep abreast and react when warranties are due to expire on Printers, copiers and fax machines. Perform all services relative to employee user accounts, including, but not limited to e:Mail. Troubleshoot network access problems and provide corrective actions. \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-08 18:12:19", "url": "http://camber.jobs/xml/28539928/job", "country": "United States", "company": "Camber Corporation", "title": "Journeyman Information Systems Analyst", "reqid": "8017", "state": "Texas", "state_short": "TX", "location": "Fort Bliss, TX", "uid": 28539928}, {"country_short": "USA", "city": "Killeen", "description": "Chief Safety Engineer 8015\nWork Location: Killeen, TX\nJob Code: 8015\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:\nDirect and manage project safety program. Must be aware of federal, state, and local safety laws to ensure compliance with all regulations. BS degree with a minimum of 6-8 years\u2019 experience in safety related analyses, Certified Safety Health Official (CSHO), or comparable safety certification, fully familiar with requirements in OSHA Standards and Training Guidelines, General Industry Training Requirements 29 CFR Part 1910, Master's degree preferred. A wide degree of creativity and latitude is expected. Provides a varity of tasks, reports to program manager.\n*This position is contingent upon award.\nJob Duties:\nShall provide all safety documentation required for project. Conduct a system safety management and engineering program using MIL-STD 882 as guidance. Prepare Safety Assessment Report (SAR) DI-SAFT-80102B and System Safety Program Plan (SSPP) DI-SAFT-816260579. Identify the safety-related functions (safety critical and safety significant) of the system and establish a protocol of analysis, design, test, and verification and validation of those functions, shall include them in the Safety Analysis. Tailor and communicate initial safety-related requirements or constraints to the system and software designers as early in the life-cycle phase as possible. Identify, document, and track system and subsystem-level hazards for inclusion in the Hazard Analysis. Identify the system-level effects of each identified hazard for inclusion in the Hazard Analysis. Categorize each identified hazard in terms of severity and probability of occurrence (specify qualification or quantification of likelihood) for inclusion in the Hazard Analysis. Conduct an in-depth analysis to identify each failure pathway and associated causal factors (internal and external). This analysis shall be to the functional depth necessary to identify logical, practical and cost-effective mitigation techniques and requirements for each failure pathway initiator (causal factor). This analysis should consider (but is not limited to) all hardware, software, and human factor interfaces as potential contributors for inclusion in the Hazard Analysis. Derive safety-specific hazard mitigation requirements to eliminate or reduce the likelihood of each causal factor for use in the Hazard Analysis. Submit for approval to the certifying authority all waivers and deviations where the system does not meet the safety requirements or certification criteria. Submit for approval to the acquiring authority an integrated system safety schedule that supports the programs engineering and programmatic milestones. Ensure the results of all safety engineering analysis that are performed are formally documented in a closed-loop hazard tracking database system. Assist project team in providing the following documentation : Functional Hazard Analysis (FHA), Preliminary Hazard Analysis (PHA), Safety Requirements/Criteria Analysis (SRCA), Subsystem Hazard Analysis (SSHA), System Hazard Analysis (SHA), Operating and Support Hazard Analysis (O&SHA), Failure Mode and Effects Analysis (FMEA) as required. \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-05-08 18:12:17", "url": "http://camber.jobs/xml/28539926/job", "country": "United States", "company": "Camber Corporation", "title": "Chief Safety Engineer 8015", "reqid": "8015", "state": "Texas", "state_short": "TX", "location": "Killeen, TX", "uid": 28539926}, {"country_short": "USA", "city": "Texarkana", "description": "Program Manager-7910\nWork Location: Texarkana, TX\nJob Code: 7910\n# of openings: 1\nSalary Range (Annual): TBD\n\n\nDescription\n\nRequirements:\nCamber is seeking a Program Manager with working knowledge of the SAP Manufacturing process, Routes, and BOMs. The ideal candidate will have over 10 years of experience working in Logistics with depot knowledge of how Routes and BOMs are created, and must be capable of performing process evaluation, and suggesting improvements to Depot operations. Experience with the CECOM or AMCOM depots is also acceptable. NAC background investigation is required for this position.\nJob Duties:\nThe Program Manager will facilitate, monitor and support the implementation of LMP. Support will consist of conducting and managing the validation of LMP standard work throughout the workforce. This includes detailed interviews of end users, observing the execution of LMP transactions within each position, providing ad hoc training to improve shop floor understanding and processing issues in LMP, and ensuring off shift training is conducted for shop supervisors. Provide analysis for Logistics Support Activities Data quality audits ( LOGAS) process and develop corrective action plans. Provide understanding and suggestions of daily production activities in LMP system to assist Directorate for Maintenance. Provide analysis and support in the development and documentation of Capacity Planning and Master Scheduling functions related to the site. Update documents, provide LMP support to management, assist in lean initiatives, ad hoc training support and assist in potential re-organizational realignments \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-04-17 18:22:50", "url": "http://camber.jobs/xml/27947586/job", "country": "United States", "company": "Camber Corporation", "title": "Program Manager-7910", "reqid": "7910", "state": "Texas", "state_short": "TX", "location": "Texarkana, TX", "uid": 27947586}, {"country_short": "USA", "city": "Texarkana", "description": "Technical Analyst-7914\nWork Location: Texarkana, TX\nJob Code: 7914\n# of openings: 4\nSalary Range (Annual): TBD\n\n\nDescription\n\nRequirements:\nCamber is seeking a Technical analyst with working knowledge of SAP, manufacturing processing, Routes, and BOMs. The ideal candidate will have over 10 years of experience working in Logistics with depot knowledge of how Routes and BOMs are created, and must be capable of performing process evaluation and suggesting improvements to Depot operations. Experience with the CECOM or AMCOM depots is also acceptable. NAC background investigation will be required for this position.\nJob Duties:\nAssist the PM with monitoring and supporting the implementation of LMP. Support will consist of conducting the validation of LMP standard work throughout the workforce. This includes detailed interviews of end users, observing the execution of LMP transactions within each position and conducting process improvements. Provide ad hoc training as required to improve shop floor understanding and processing issues in LMP. Provide off shift training as required for shop supervisors. As assigned, provide analysis for Logistics Support Activities Data quality audits ( LOGAS) process and develop corrective action plans. Develop tools as requested to enhance the understanding of daily production activities in the LMP system. Provide analysis and support in the development and documentation of Capacity Planning and Master Scheduling functions related to the site. Update documents, provide LMP support to management, assist in lean initiatives, ad hoc training support and assist in potential re-organizational realignments.  \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-04-17 18:22:45", "url": "http://camber.jobs/xml/27947559/job", "country": "United States", "company": "Camber Corporation", "title": "Technical Analyst-7914", "reqid": "7914", "state": "Texas", "state_short": "TX", "location": "Texarkana, TX", "uid": 27947559}, {"country_short": "USA", "city": "Corpus Christi", "description": "Component Engineer/Analyst\nWork Location: Corpus Christi, TX\nJob Code: 7900\n# of openings: 1\nSalary Range (Annual): TBD\n\n\nDescription\n\n\nCamber Corporation is seeking a Component Engineer/Analyst to join our diverse, team oriented Company that is Customer Focused- Employee Driven. The successful candidate will join our team of exceptionally dedicated professionals in an exciting and rewarding fast- paced highly successful company.\nRequirements:The ideal candidate will have 12 or more years of progressive technical experience related to maintenance and/or overhaul of helicopter components, systems, engines, or structures. Must have a team-oriented mindset and the ability to work with engineers, technical analysts, Original Equipment Manufacturers (OEM), repair artisans, and technicians. A bachelor's degree in engineering with 12 or more years experience, or, a technical background in aviation with 16 or more years experience in helicopter components is required for this position. This effort involves extensive travel. Applicants must be able to obtain and hold a US DoD Secret Clearance. Position is located in Corpus Christi, Texas.\nDuties:Technical Analyst or Engineer will provide professional and scientific engineering analysis related to the repair, overhaul, maintenance, and modification of Army OH-58D helicopter components, systems, engines, structures, and flight systems. Provide technical expertise overseeing the analysis and evaluation of component maintenance problems for OH-58D helicopters. Extensive travel is required to oversee numerous OEM component design and evaluation at various CONUS locations. A positive attitude, a strong desire to succeed, excellent people skills, and the ability to write technical documentation is required. The candidate will apply knowledge of technical and engineering principles to interpret drawings, conduct research, collect data, and use deductive reasoning to attain recommended solutions.\n\n\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-04-16 20:41:11", "url": "http://camber.jobs/xml/27929483/job", "country": "United States", "company": "Camber Corporation", "title": "Component Engineer/Analyst", "reqid": "7900", "state": "Texas", "state_short": "TX", "location": "Corpus Christi, TX", "uid": 27929483}, {"country_short": "USA", "city": "Corpus Christi", "description": "NDT Technical Analyst-7795\nWork Location: Corpus Christi, TX\nJob Code: 7795\n# of openings: 1\nSalary Range (Annual): TBD\n\n\nDescription\n\nCamber Corporation is seeking an NDT Technical Analyst to join our diverse, team oriented Company that is Customer Focused- Employee Driven. The successful candidate will join our team of exceptionally dedicated professionals in an exciting and rewarding fast- paced highly successful company. \nMinimum Requirementsfor this position is 12 years or more experience in the Aerospace NDT industry, NAS 410 Level II or NAS 410 Level III certifications in Magnetic Particle (MT), Liquid Penetrant (PT), Eddy Current Ultrasonic Inspection (UT), and Radiographic Inspection (RT) methods is required. Good analytical skills and problem solving abilities, confidence and ability to work independently, and be self-motivated, but also be a team-player. The candidate must possess strong technical writing, word processing, and database skills. A four year degree is preferred but experience may substitute education. Secret Security Clerance required.\n\nJob Duties: Develop depot level and field level non-destructive testing technique sheets in the Fluorescent Penetrant, Magnetic Particle, Eddy Current, Ultrasonic, and Radiography methods on location at Corpus Christi Army Depot. The candidate will act as the subject matter expert in the development of Technique Sheets for Critical Safety Items (CSI) and non-CSI parts. Performs a variety of tasks. Works under general supervision. Typically reports to a Level II and Level III supervisor or manager.  \n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-03-14 21:09:52", "url": "http://camber.jobs/xml/27144457/job", "country": "United States", "company": "Camber Corporation", "title": "NDT Technical Analyst-7795", "reqid": "7795", "state": "Texas", "state_short": "TX", "location": "Corpus Christi, TX", "uid": 27144457}, {"country_short": "USA", "city": "Dallas", "description": "Systems Engineer-7821\nWork Location: Dallas, TX\nJob Code: 7821\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements: BS in engineering, aerospace, math, physics, or computer science. Ten years or more years experience in technical management of DoD and Commercial Programs. Experience with VHDL programming, Verilog, Xilinx ISE preferred. Five years or more experience in design and/or test of radar systems or radio-frequency based systems preferred. Superior written and verbal skills.\nRequirements: \nBS in engineering, aerospace, math, physics, or computer science. Ten years or more experience in technical management of DoD and Commercial Programs. Experience with VHDL programming, Verilog, Xilinx ISE preferred. Five years or more experience in design and/or test of radar systems or radio-frequency based systems preferred. Superior written and verbal skills.\n\nJob Duties:\n1) Provide system design development and methodologies for complex, real-time systems on multiprocessor platforms. (2) Perform or supervise the design, integration, test, and/or documentation of microprocessor-based firmware systems. (3) Perform or supervise the design, integration, test, and/or documentation of hardware and software systems.(4) Provide technical supervision and customer interface. (5) Perform other duties as assigned.\n\nClearance:Secret\nEducation: Bachelor/Discipline Electrical Engineering, Math, Computer Science, Physics\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-03-09 19:41:37", "url": "http://camber.jobs/xml/27040594/job", "country": "United States", "company": "Camber Corporation", "title": "Systems Engineer-7821", "reqid": "7821", "state": "Texas", "state_short": "TX", "location": "Dallas, TX", "uid": 27040594}, {"country_short": "USA", "city": "San Antonio", "description": "Jr. Systems Engineer -7764\nWork Location: San Antonio, TX\nJob Code: 7764\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements: Candidate must have a minimum of six years of experience in computer systems, networking, and their related tools. Specific experience with Cisco Catalyst Switches, Server Load-Balancers, Firewalls, Network Analyst Tools, ONS backbone equipment, Hardware Encryption, VPN-IPSEC, and VoIP Call Managers. Cisco CCNA is highly desired. Additionally, experience in the following is desired: telecommunications and networking hardware engineering principles; data communications; computer network practices; analyzing technical problems; gathering technical information; information analysis; issue/problem resolution; technical writing of documentation; problems resolution; and PERL scripting.\nJob Duties: The customer organization is looking for a well-rounded individual with excellent organizational and communication skills. Responsibilities of the selected individual encompass a wide range of duties to include facilitating the design and outfitting of the operations center\u2019s networking, communications and physical infrastructure; installing, testing and fielding network, telecommunications and computer systems; and monitoring and maintaining deployed equipment. The organization has an operations area that is responsible for 24/7 service support. On the occasion where the operations system administrators need tier-2 support, they would be expected to troubleshoot and rectify problems after-hours and/or weekends.support, they would be expected to troubleshoot and rectify problems after-hours and/or weekends.\nClearance Required:Top Secret/SCI with Full Scope\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-02-27 18:22:21", "url": "http://camber.jobs/xml/26782950/job", "country": "United States", "company": "Camber Corporation", "title": "Jr. Systems Engineer -7764", "reqid": "7764", "state": "Texas", "state_short": "TX", "location": "San Antonio, TX", "uid": 26782950}, {"country_short": "USA", "city": "San Antonio", "description": "Network Watch Officer -7765\nWork Location: San Antonio, TX\nJob Code: 7765\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:This position requires proven verbal and written communication skills. The candidate should be comfortable interacting with all levels of organizational hierarchies, be proficient at operating in a dynamic environment with minimal supervision and possess strong interpersonal, problem-solving, and decision-making skills. Candidate must understand network protocols, devices, and topologies. This includes an understanding of WAN, LAN, networking and telephony, and telecommunication communications topology. Experience in mission support and operational facilities experience including monitoring tools, trouble ticketing systems, server rooms, rack layout, power and cooling, grounding, and cabling standards is highly beneficial. Applicants should be familiar with the principles of Computer Network Operations. Must have good Linux/Unix and Windows skills and knowledgeable in active directory, and remote access tools.\nJob Duties: The division maintains a 24/7 operational tempo. As a result, the Network Watch Officers (NWO) are assigned to a compressed work schedule. TheNWOis a first responder in the event of a failure and must display sound troubleshooting skills. The depth at which aNWOwill investigate and resolve problems is limited only by his or her skill set and aptitude. Once the complexity of a problem has exceeded the NWO\u2019s training, he or she will execute an escalation process to ensure a timely response. Additional duties include the following: regular briefings of Office level leadership detailing infrastructure status; maintaining situational awareness of operational infrastructure to partner sites; maintaining an event log and executing an effective pass-down between shifts; and providing OUTSTANDING customer support to our customers.\nClearance Required:Top Secret/SCI with Full Scope\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-02-27 18:22:21", "url": "http://camber.jobs/xml/26782949/job", "country": "United States", "company": "Camber Corporation", "title": "Network Watch Officer -7765", "reqid": "7765", "state": "Texas", "state_short": "TX", "location": "San Antonio, TX", "uid": 26782949}, {"country_short": "USA", "city": "Fort Hood", "description": "Small Arms Repairman 7646\nWork Location: Fort Hood, TX\nJob Code: 7646\n# of openings: 25\nSalary Range (Annual): TBD\n\n\nDescription\n\nRequirements:\nHS Diploma or Associates Degree preferred. Must be able to obtain and maintain a DoD clearance. Prior small arms experience is required. Individuals will be required to work at various locations within the USA as well as International locations.\nJob Duties:\nSmall arms repair.\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2012-01-11 20:50:10", "url": "http://camber.jobs/xml/25834860/job", "country": "United States", "company": "Camber Corporation", "title": "Small Arms Repairman 7646", "reqid": "7646", "state": "Texas", "state_short": "TX", "location": "Fort Hood, TX", "uid": 25834860}, {"country_short": "USA", "city": "Fort Hood", "description": "Inventory Control Point Specialist-7539\nWork Location: Fort Hood, TX\nJob Code: 7539\n# of openings: 3\nSalary Range (Annual): \n\n\nDescription\n\n\n\nRequirements: Able to obtain \"Secret\" Security Clearance. Able to pass Deployment Medical. Good Written/Verbal Communications Skills. Able to deploy CONUS/OCONUS up to 12 Months. Computer knowledge/skills pertinent to the field. High School diploma or equivalent. Inventory Management Experience. \nJob Duties: Physical Inventory Management - Warehousing Experience. Shipping/Receiving Experience. HAZMAT/AES/IATA Experience. Inventory Database Experience. Setting Reorder Point and Stock Objective Experience. Work Orders, Purchase Orders, Sales Orders, ABC Codes Experience. COMSEC Material handling Experiencenventory Management Experience. Physical Inventory Management - Warehousing Experience. Shipping/Receiving Experience. HAZMAT/AES/IATA Experience. Inventory Database Experience. Setting Reorder Point and Stock Objective Experience. Work Orders, Purchase Orders, Sales Orders, ABC Codes Experience. COMSEC Material handling Experience.\n\n\n\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2011-11-18 22:23:31", "url": "http://camber.jobs/xml/24961011/job", "country": "United States", "company": "Camber Corporation", "title": "Inventory Control Point Specialist-7539", "reqid": "7539", "state": "Texas", "state_short": "TX", "location": "Fort Hood, TX", "uid": 24961011}, {"country_short": "USA", "city": "San Antonio", "description": "Mid-level Cyber Analysis Support Specialist - 7438\nWork Location: San Antonio, TX\nJob Code: 7438\n# of openings: 1\nSalary Range (Annual): TBD\n\n\nDescription\n\nRequirements:\nShall have a minimum of six continuous years of work experience in intelligence analysis or a related field, or a combination of a minimum of three continuous years of work experience in intelligence analysis or a related field and a Bachelors degree in an applicable (math, science, computers, engineering) field. Work experience shall include three years of Intelligence Community or related experience in intelligence analysis.\nShall have demonstrated competence with relevant CNO and SIGINT tools and databases used for the customer mission, and communications skills that include the ability to provide formal documentation of analysis and/or research results. Shall be considered a Subject Matter Expert in one or more fields appropriate to Intelligence Analysis or Computer Networking technologies, and be able to serve as a Subject Matter Expert for working groups and meetings with partner organizations / agencies.\nShall have demonstrated expertise in analyzing intelligence information and technical data, analyzing exploitation opportunities, documenting information and processes, gathering intelligence information, interpreting analytical results, performing Internet research, writing and editing skills at a technical/professional level, and managing internal and external customer relations. Shall be an effective writer and verbal communicator.\n\n\n\n\nJob Duties:\n\nSupporting NTOC efforts to partner with other organizations on the identification of vulnerabilities and corresponding threats with the goal of influencing mitigation strategies and solutions.\nPerforming tasks associated with the SIGINT and/or other intelligence disciplines\u2019 production cycle, including researching, tasking, analysis, reporting, assessing, and interacting with customers.\nAnalyzing and assessing technical and operational vulnerabilities in U.S./DOD or foreign current or emerging technologies or operations, and determining risk to U.S. networks of interest posed by adversarial systems, activities or operations.\nAnalyzing all-source intelligence data, identifying critical threat information, researching historical threat reporting, and crafting assessments in support of customer information needs.\nPerforming all-source research to identify and report on the intentions and capabilities of adversaries, state and non-state sponsored, to threaten, exploit or otherwise disrupt networks of interest to the U.S. and its allies.\nAssisting with the development of databases and other knowledge repositories on adversary information warfare and hacker capabilities, intentions and supporting infrastructures.\nCompiling and correlating data sets to determine levels of threats and vulnerabilities to U.S. network systems.\nProducing threat/vulnerability assessments.\nPerforming risk and opportunity assessments through synthesis of information across intelligence disciplines and open-source information.\nResearching and analyzing data using available and appropriate analytic tools.\nAssisting technical personnel in developing automated analytic tools by providing specific information about adversary targets and techniques.\nDeveloping end-product report drafts and entering them into report production systems.\nAssisting in the evaluation and staffing of Information Needs (IN); interacting with customers, other production elements and data acquisition offices in order to meet customer needs.\nScheduling meetings, analytic exchanges, organizing data and providing threat analysis support to branch and division-level managers.\nParticipating in team building research efforts, sharing analytical techniques and research methodologies.\nContributing to knowledge management by entering sources and analytic findings into appropriate databases and other repositories on a timely basis.\nMeeting customers\u2019 delivery deadlines and satisfying customer expectations for accuracy and completeness.\nDocumenting reports and customer feedback in local Request for Information (RFI) tracking databases and other recording systems.\nIdentifying adversary presence in the Internet and using visualization tools to map the information systems, networks and major servers they use.\nUsing research and analytic findings to identify network associations and map them in diagram/topology presentations.\nPerforming baseline and secondary analysis and providing visualization support by using Analyst Notebook and NetViz or other visualization tools.\nMaking recommendations for additional collection possibilities when and where possible.\nConducting and tracking behavior analysis and characterization of adversary decision processes, their technological dependencies and social network connections.\nDocumenting all research and analysis using standard document and network mapping tools.\n\n\n\nCLEARANCE REQUIREMENTS: Must have current TS/SCI with a Full Lifestyle Polygraph; CI Polys may be accepted for exceptional candidate\n\n\n\nMust be able to research, analyze, and report on computer network probes/attacks, trends, and hacker tools and techniques to produce indications and warning reports on impending network attacks against United States Defense and national infrastructure systems. In addition, must be able to analyze network nodes (people and groups) and characterize linkages that show the relationships or flows between nodes. Experience supporting NTOC efforts to partner with other organizations highly desired!\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2011-10-28 21:03:10", "url": "http://camber.jobs/xml/24478445/job", "country": "United States", "company": "Camber Corporation", "title": "Mid-level Cyber Analysis Support Specialist - 7438", "reqid": "7438", "state": "Texas", "state_short": "TX", "location": "San Antonio, TX", "uid": 24478445}, {"country_short": "USA", "city": "Fort Hood", "description": "UAS Avionics Technician I -7360\nWork Location: Fort Hood, TX\nJob Code: 7360\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements:High school diploma plus a civilian or military aviation maintenance technical school and a minimum 3 years experience within unit level aircraft maintenance operations in the electronics field and extensive experience in closely related aircraft or other electronics endeavor. Position requires component level troubleshooting skills, detail oriented maintenance practices, and good communication skills. Must be able to read and follow military style technical orders, read electronic/electrical schematics, and have a moderate level of knowledge of computer networking functionality. The ability to work both independently and in a team environment is essential. Must have a working knowledge of U.S. military aircraft maintenance forms & record keeping procedures. Familiarity with currently fielded US military avionics and operational experience at deployed sites is highly desired. Must be able to obtain and maintain a DoD Secret Security Clearance.\n\nThis position is located at various CONUS and OCONUS sites. Must be willing to travel.\nJob Duties: TheUAS Avionics Technician I performs inspection and periodic maintenance on the aircraft, ground control station, ground data terminal, takeoff and landing systems, and associated ground support equipment. Works under the supervision of senior technicians to diagnose, troubleshoot and repair malfunctions in Unmanned Aircraft Systems electrical, avionics, radio frequency, optical payload, and weapon systems components including solid state andtransistorized subsystems according to pertinent technical manuals, directives and safety procedures. Remove and install unmanned aircraft system subassemblies. Performs aircraft fueling operations. Serve as crew member performing launch and recovery operations. Perform maintenance and authorized modifications on unmanned aircraft systems components. Repairs, replaces and performs operational and preventive checks and alignments on aircraft flight controls, stabilization systems, avionics and controlled cryptographic equipment. Use test sets and diagnostic equipment. Maintain comprehensive records on all system equipment and associated maintenance. Schedules maintenance on test, measurement and diagnostic equipment. Alters or modifies material according to DA approved modification work orders. Differences training will be provided as needed for qualified individuals prior to assignment and/or deployment.\n\nPosition may require periodicOCONUS deployments in support of worldwideUASoperations.\n\n\nClearance: Must be able to obtain and maintain a DoD Secret Security Clearance\nContingent hire based on anticipated contract award\n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2011-10-12 22:22:32", "url": "http://camber.jobs/xml/24188549/job", "country": "United States", "company": "Camber Corporation", "title": "UAS Avionics Technician I -7360", "reqid": "7360", "state": "Texas", "state_short": "TX", "location": "Fort Hood, TX", "uid": 24188549}, {"country_short": "USA", "city": "Fort Hood", "description": "UAS Aircraft Mechanic I- 7363\nWork Location: Fort Hood, TX\nJob Code: 7363\n# of openings: 1\nSalary Range (Annual): \n\n\nDescription\n\nRequirements: High school diploma plus a civilian or military aviation maintenance technical school and a minimum 3 years experience within unit level aircraft maintenance operations. Position requires detail oriented maintenance procedures and good communication skills. Must have a working knowledge of U.S. military aircraft forms & record keeping procedures and be able to read and follow military style technical orders. The ability to work both independently and in a team environment is essential. Previous operational deployment with US military unmanned aircraft is highly desired. FAA Airframe & Power plant License, FAA Class II Physical, is desireable. Must be able to obtain and maintain a DoD Secret Security Clearance.\nThis position is located at various CONUS and OCONUS sites. Must be willing to travel.\nJob Duties: Perform scheduled and unscheduled maintenance on unmanned aerial vehicles. Inspect at regular intervals: airframe, propeller and engine. Diagnose, troubleshoots and repairs malfunctions in Unmanned Aircraft Systems propulsion, fuel, payload, and weapon systems components according to pertinent technical manuals, directives and safety procedures. Remove and replace airframe components as needed including aileron servos, flap servos, brake servos, landing gear servos and throttle and waste gate servos. Perform all launch and recovery of aircraft including necessary inspections, starting engine, operational check, installing payloads (cameras, KU, Datalink, SAR, EO/IR), and fueling and de-fueling. Incorporate any TCTOs and other modifications into all aircraft as needed. Interface with customers, military and civilians. Maintain records on all system equipment.\n\n\n\n\nClearance: Must be able to obtain and maintain a DoD Secret Security Clearance\n\n\n\n\n\nPosition may require periodic OCONUS deployments in support of worldwide UAS operations. \n\n\nAbout Us\n\n\nCamber Corporation is headquartered in Huntsville, AL. Founded in 1990, we have over 106 locations worldwide. We provide responsive engineering services and technical support to our customers worldwide. Camber recognizes its employees are its greatest asset, and customer-focused efforts are the primary reason for its success. Key competencies include Information Technology, Homeland Security including support for the development of Chemical and Biological defensive systems, Training and Education including Distributed/Distance Learning, development of Decision Support Systems, Modeling and Simulation, Systems Engineering, and Software Engineering. Camber Corporation provides simulation based tools and services for training, mission planning, rehearsal, after action reviews, virtual reality command and control, and engineering analysis.", "date_new": "2011-10-12 22:22:32", "url": "http://camber.jobs/xml/24188547/job", "country": "United States", "company": "Camber Corporation", "title": "UAS Aircraft Mechanic I- 7363", "reqid": "7363", "state": "Texas", "state_short": "TX", "location": "Fort Hood, TX", "uid": 24188547}]